ZDX V6-3.7L (2010)
Air Door Actuator / Motor: Service and Repair
Recirculation Control Motor Replacement
Recirculation Control Motor Replacement
Removal
1. Remove the passenger's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Passenger's Dashboard Undercover Removal/Installation.
2. Remove the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation.
3. Remove the climate control unit See: Control Assembly/Service and Repair.
4. Disconnect the 7P connector (A) from the recirculation control motor (B). Remove the self-tapping screws and the recirculation control motor
from the blower unit.
Installation
1. Make sure the damper lever pins in the motor lever are visible through the holes.
2. While holding the recirculation control motor (A), install the self-tapping screws and connect the 7P connector (B).
