ZDX V6-3.7L (2010)
Evaporator Core: Service and Repair
Evaporator Core Replacement
1. Recover the refrigerant with a recovery/recycling/charging station See: Service and Repair/A/C Refrigerant Recovery.
2. Remove the bolt from the A/C line clamp (A).
3. Remove the bolt, then disconnect the A/C line (A) from the evaporator core. Replace the O-rings (B).
4. Remove the blower unit See: Blower Motor/Service and Repair/Blower Unit Removal/Installation.
5. Disconnect the power transistor connector (A). Detach the harness clips (B). Remove the self-tapping screws, the joint duct (C), and the seal (D).