ZDX V6-3.7L (2010)
7. Remove the dashboard See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Dashboard/Steering
Hanger Beam Removal/Installation.
8. Disconnect the right engine compartment wire harness connector (C201) (A). Remove the duct (B), and the drain hose (C). Then remove the
mounting nuts, and the blower-heater unit (D).
9. Disconnect the connector (A) from the blower motor. Remove the wire harness clips (B).
10. Disconnect these connectors (A): The passenger's mode control motor, the power transistor, and the passenger's air mix control motor. Detach the
harness clips (B).