ZDX V6-3.7L (2010)
Dimmer Switch: Service and Repair
Dashlight Brightness Controller Switch Test/Replacement
1. Remove the instrument fascia (A) See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Fascia Removal/Installation.
2. Remove the two screws and Dashlight brightness controller switch (B) from the instrument fascia.
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified or the LED does not turn on, replace the switch.