ZDX V6-3.7L (2010)
-
If the horns sound, go to step 9.
-
If the horns do not sound, or replace the cable reel See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and
Repair.
9. Disconnect the cable reel cable reel connector C (20P) (A).
10. Check for continuity between ground terminal (T6) and cable reel connector C (20P) terminal No. 12. There should be continuity.
-
If there is continuity, go to step 11.
-
If there is no continuity.
-
An open in the wire, replace the cable reel subharness.
-
Poor ground terminal connection(T6).
11. Check for continuity between cable reel connector C (20P) terminal No. 11 and horn switch positive terminal 1P. There should be continuity.
-
If there is continuity, check or adjust the installation of the driver's airbag assembly and the horn switch plate or replace the driver's airbag
assembly.
-
If there is no continuity, repair an open in the wire, or replace the cable reel subharness.