ZDX V6-3.7L (2010)
Fluid - A/T: Service and Repair
ATF Level Check
ATF Level Check
NOTE:
-
Keep all foreign particles out of the transmission.
-
Check the fluid level within 60-90 seconds after turning the engine off.
-
Higher fluid level may be indicated if the radiator fan comes on twice or more.
1. Park the vehicle on the level ground.
2. Warm up the engine to normal operating temperature (the radiator fan comes on), then turn the engine off.
3. Remove the ATF dipstick (yellow loop) (A) from the dipstick guide tube, and wipe it with a clean cloth.
4. Insert the dipstick back into the dipstick guide tube (B) aligning the notch (C) with the guide tab (D).
5. Remove the dipstick and check the fluid level. It should be between the upper mark (A) and the lower mark (B).
