ZDX V6-3.7L (2010)
17. Loosely install the upper half of the side engine mount bracket (A), then install the ground cable bracket (B).
18. Remove the jack and the wood block.
19. Tighten the mounting bolts in the numbered sequence shown.
20. Install the drive belt auto-tensioner See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt
Tensioner/Service and Repair/Drive Belt Auto-Tensioner Replacement.
21. Install the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement and the engine undercover See:
Body and Frame/Splash Guard/Service and Repair/Engine Undercover Replacement.
22. Install the right front wheel.
23. Do the crankshaft position (CKP) pattern clear/CKP pattern learn procedure See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview.
