acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Vehicle Lifting > < Towing Information|Service and Repair|Page 1314
Page 3
background image

2. Remove the detachable towing hook from the tool kit under the cargo area.

3. Screw in the detachable towing hook (D), and tighten it securely by hand.

Wheel Lift Equipment -The tow truck uses two pivoting arms that go under the tires (front or rear) and lifts them off the ground. The other two wheels
remain on the ground. Never tow the vehicle with wheel lift equipment.

Sling-type Equipment -The tow truck uses metal cables with hooks on the ends. These hooks go around parts of the frame or suspension, and the cables
lift that end of the vehicle off the ground. The vehicle's suspension and body can be seriously damaged if this method of towing is attempted. This
method of towing the vehicle is unacceptable.

The only recommended way of towing the vehicle is on a flat-bed tow truck.

NOTICE

-

Towing the vehicle with only two wheels on the ground will damage parts of the SH-AWD system. If the vehicle is damaged, it must be
towed on a flat-bed tow truck or trailer.

-

Trying to lift or tow the vehicle by the bumpers will cause serious damage. The bumpers are not designed to support the vehicle's weight.

For the vehicle equipped with the engine start/stop button:

-

If the battery is discharged, the ACC mode cannot be selected by pushing the engine start/stop button.Charge or replace the battery to unlock the
steering wheel before towing.

-

If the ACC mode cannot be selected because of in an electrical problem other than a discharged battery, the vehicle must be transported on a
flat-bed tow truck.

Vehicle Lifting > < Towing Information|Service and Repair|Page 1314