ZDX V6-3.7L (2010)
Tire Pressure Module: Service and Repair
TPMS Control Unit Replacement
NOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may affect its communication with the initiators and the tire
pressure sensors.
1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
2. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
3. Disconnect the TPMS control unit 20P connector (A).
NOTE: The TPMS control unit is located on the brake pedal.
4. Remove the flange bolt (A), and separate the relay block (B) from the bracket (C).
5. Remove the TPMS control unit (D) with the bracket.
6. Remove the TPMS control unit (A) from the bracket (B).
NOTE: To disconnect the TPMS control unit from its bracket, insert a small flat-tipped screwdriver (C) between the TPMS control unit and the bracket
