ZDX V6-3.7L (2010)
Go to step 31.
31. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
32. Disconnect the HDS from the DLC.
33. Measure the voltage between DLC terminal No. 16 and body ground.
Is there battery voltage?
YES -
Go to step 34.
NO -
Repair open in the wire between DLC terminal No. 16 and the No. 15 BACK UP (10 A) fuse in the under-hood fuse/relay box.
34. Measure the voltage between DLC terminals No. 4 and No. 16.
Is there battery voltage?
YES -
Go to step 35.
NO -
Repair an open in the wire between DLC terminal No. 4 and body ground (G402).
35. Connect the HDS to the DLC See: Testing and Inspection/Initial Inspection and Diagnostic Overview.
36. Jump the SCS line with the HDS.
37. Disconnect PCM connector A (49P).