ZDX V6-3.7L (2010)
3. From the BODY ELECTRICAL menu, select B-CAN CONTROL UNITS INFORMATION, and then select CONNECTED UNITS listed to see
if the following control units are communicating with the HDS.
-
Driver's MICU
-
Passenger's MICU
-
Door multiplex control unit
(HDS name: Power Window Unit)
-
Gauge control module
-
Immobilizer-keyless control unit
-
Climate control unit
-
HandsFreeLink control unit
-
Audio unit
-
Power seat control unit(HDS name: Memory seat control unit)
-
AcuraLink control unit (XM receiver)
(HDS name: HIP (Honda Information Platform) Unit)
-
Keyless access control unit
(HDS name: Keyless access ECM)
-
Power tailgate control unit
-
BSI control unit
NOTE:
-
If a unit is communicating with the HDS, DETECT will be displayed.
-
If a unit is not communicating or the vehicle is not equipped, "NOT AVAILABLE" will be displayed.
-
The HDS only checks the status one time when BODY ELECTRICAL is selected. To recheck the status after repair, reboot the HDS.
Are all control units communicating with the HDS?
YES -
Go to step 4.
NO -
If any of the control units are not communicating, go to B-CAN System Diagnosis Test Mode B See: Troubleshooting - B-CAN System Diagnosis Test
Mode B. If all units are not communicating or only the driver's MICU is communicating, go to DTC U1280 troubleshooting See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U Code Charts/U1280.
4. Select the system that has the problem from the BODY ELECTRICAL menu, then select DTCs.
Are any DTCs indicated?
YES -