ZDX V6-3.7L (2010)
Leak Detection Solenoid: Service and Repair
EVAP Canister Vent Shut Valve Replacement
1. Remove the EVAP canister cover See: Evaporative Emission Control Canister/Service and Repair.
2. Disconnect the EVAP canister vent shut valve 2P connector (A).
3. Remove the cap (B).
4. Remove the EVAP canister vent shut valve (C).
5. Install the parts in the reverse order of removal with a new O-rings (D) and a new cap.
NOTE: Do not coat the O-rings with oil.