ZDX V6-3.7L (2010)
Fuel Line Coupler: Service and Repair
Fuel Line/Quick-Connect Fitting Removal
Fuel Line/Quick-Connect Fitting Removal
NOTE: Before you work on the fuel lines and fittings, read the Fuel Line/Quick-Connect Fitting Precautions See: Service Precautions.
1. If equipped, remove the quick-connect fitting cover from the fuel line. Raise the cover (A) from the fuel line (B), and remove it as shown.
2. Relieve the fuel pressure See: Fuel Filter/Fuel Pressure Release/Service and Repair.
3. Check the fuel quick-connect fittings (A) for dirt, and clean them if needed.