ZDX V6-3.7L (2010)
Fuel Pressure Regulator: Service and Repair
Fuel Pressure Regulator Replacement
1. Remove the fuel tank unit See: Fuel Pump/Service and Repair/Fuel Tank Unit Removal/Installation.
2. Remove the reservoir (A).
3. Remove the bracket (A).
4. Remove the clip (B).
5. Remove the fuel pressure regulator (C).
6. Install the parts in the reverse order of removal with new O-rings (D). When installing the fuel tank unit, align the marks on the fuel tank unit and
the fuel tank See: Fuel Pump/Service and Repair/Fuel Tank Unit Removal/Installation.
NOTE:
-
Coat the O-rings with clean engine oil; do not use any other oil or fluid.
-
Do not pinch the O-rings during installation.
-
Use all the new parts supplied in the pressure regulator replacement kit.