ZDX V6-3.7L (2010)
Fuel Filler Hose: Service and Repair
Fuel Fill Pipe Removal/Installation
1. Drain the fuel tank See: Service and Repair.
2. Remove the fuel fill cap.
3. Raise the vehicle on a lift.
4. Remove the left rear wheel.
5. Remove the left rear inner fender See: Body and Frame/Fender/Rear Fender/Rear Fender Liner/Service and Repair.
6. Disconnect the quick-connector fitting (A) and the fuel fill tube (B) from the fuel fill pipe (C). Slide back the clamp, then twist the hose as you pull
to avoid damaging it.
7. Remove the fuel fill pipe (B).
8. Install the parts in the reverse order of removal.