ZDX V6-3.7L (2010)
Crankshaft Position Sensor: Service and Repair
CKP Sensor Replacement
CKP Sensor Replacement
1. Raise the vehicle on a lift.
NOTE: Make sure the vehicle is level, because engine oil will drip out when you remove the sensor.
2. Remove the CKP sensor cover (A).
3. Disconnect the CKP sensor connector (B).
4. Remove the CKP sensor (C).
5. Install the parts in the reverse order of removal with a new O-ring (D).
6. Do the CKP pattern clear/CKP pattern learn procedure See: Computers and Control Systems/Testing and Inspection/Initial Inspection and
Diagnostic Overview.
7. Check the engine oil level, and add more oil if needed.
