ZDX V6-3.7L (2010)
Ignition Switch: Service and Repair
Ignition Switch Replacement
NOTE: SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, precautions
and procedures See: Restraint Systems/Air Bag Systems/Service Precautions before doing repairs or servicing.
1. Do the battery terminal disconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
2. Remove the steering column covers See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair.
3. Remove the two screws, the harness clip, and the bracket (A).
4. Disconnect the 5P connector (A) from the ignition switch (B).
5. Remove the two screws and the ignition switch.
6. Install the parts in the reverse order of removal.
7. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
