ZDX V6-3.7L (2010)
12. Measure the A/T clutch pressure control solenoid valve A, B, C, or D resistance between connector terminals No. 1 and No. 2.
-
If the resistance is out of the standard, replace the secondary valve body See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Overhaul/Valve Body/Secondary Valve Body Replacement.
-
If the resistance is within the standard, go to step 13.
13. Connect a jumper wire from the negative battery terminal to solenoid valve A, B, C, or D connector terminal No. 2, and connect another jumper
wire from the positive battery terminal to connector terminal No. 1.
-
If a operating sound is heard, the valve is OK. Reconnect the connector, and install all removed parts.
-
If no operating sound is heard, replace the secondary valve body See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service
and Repair/Overhaul/Valve Body/Secondary Valve Body Replacement.