ZDX V6-3.7L (2010)
NOTE: The illustration shows the left side.
7. Hold or tape the plumb line against the rear quarter panel directly above mounting hole B, and thread bolt in or out until the head of the bolt just
touches the plumb line.
8. Measure the distance from the head to the end of the threaded insert in the quarter panel. If needed, have a body shop adjust the body panel.
NOTE: The illustration shows the left side.
9. Hold or tape the plumb line against the rear quarter panel directly above mounting hole C, and thread bolt in or out until the head of the bolt just
touches the plumb line.
10. Measure the distance from the head to the end of the threaded insert in the quarter panel. If needed, have a body shop adjust the body panel.
