ZDX V6-3.7L (2010)
4. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
5. Clear any DTCs with the HDS See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
6. After installing the side curtain airbag, confirm proper system operation: Turn the ignition switch to ON (II), or press the engine start/stop button
to select the ON mode, and check that the SRS indicator comes on for about 6 seconds and then goes off.
7. Install all removed parts in reverse order of removal. If any clips are stress-whitened, replace them with new ones.
8. Confirm proper headliner/pillar trim overlap See: Service and Repair.
