ZDX V6-3.7L (2010)
Blind Spot Switch: Service and Repair
BSI OFF Switch Test/Removal/Installation
1. Remove the driver's outer dashboard trim See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Outer Dashboard Trim Removal/Installation.
2. Remove the multi switch (with the built-in BSI OFF switch) (A), then disconnect the multi switch 12P connector (B) and the power mirror switch
13P connector (C).
3. On the switch side, check for continuity between the multi switch 12P connector terminal in each switch position according to the table.
4. If the continuity is not as specified, remove the power mirror switch (A), then replace the multi switch (B).
