ZDX V6-3.7L (2010)
Seat Fan Switch: Service and Repair
Seat Ventilation Switch Test/Replacement
1. Remove the center console panel See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Panel Removal/Installation.
2. Disconnect the 16P [12P] connector from the seat ventilation switch (A).
[ ]: Front passenger's seat ventilation switch
3. Remove the two screws and the switch.
4. Check for continuity between terminals No. 16 [No. 12] (+) and No. 12 [No. 8] (-).
[ ]: Front passenger's seat ventilation switch
-
There should be continuity when the ventilation switch is pressed.
-
There should be no continuity when the ventilation switch is released.
5. Check for continuity between terminals No. 16 [No. 12] (+) and No. 13 [No. 9] (-).
[ ]: Front passenger's seat ventilation switch
-
There should be continuity when the heat switch is pressed.
-
There should be no continuity when the heat switch is released.
6. If the continuity check is not as specified, replace the seat ventilation switch.