ZDX V6-3.7L (2010)
Distance Sensor: Service and Repair
Millimeter Wave Radar Removal/Installation
1. Remove the front bumper See: Body and Frame/Bumper/Front Bumper/Service and Repair.
2. Disconnect the 5P connector (A), and detach the harness clips (B).
3. Remove the bolts and the millimeter wave radar (C).
NOTE: Go to step 7 if it is not necessary to disassemble the millimeter wave radar from the main bracket (D).
4. Loosen the aiming bolts (A) a little at a time, and remove the millimeter wave radar (B) from the main bracket (C).
NOTE:
-
Do not disassemble the millimeter wave radar.
-
If you disassemble the main bracket, always use new screw grommets (D).