ZDX V6-3.7L (2010)
Ride Height Sensor: Service and Repair
Suspension Stroke Sensor Replacement
Front
1. Press the engine start/stop button to select the OFF mode.
2. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
3. Remove the front wheel.
4. Disconnect the suspension stroke sensor 3P connector (A).
5. Remove the nuts, then remove the suspension stroke sensor (B).
NOTE: Use the new 6 mm nut during reassembly.
6. Install the suspension stroke sensor in the reverse order of removal.
Rear
1. Press the engine start/stop button to select the OFF mode.
2. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
3. Remove the rear wheel.
4. Disconnect the suspension stroke sensor 3P connector (A).