ZDX V6-3.7L (2010)
17. Install the shift cable bracket (A).
18. Apply molybdenum grease to the hole in the bushing (A) in the shift cable end (B).
19. Attach the shift cable end to the control lever (C), then insert the control pin (D) into the control lever hole through the shift cable end, and secure
the control pin with the spring clip (E).
20. Install the battery base See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Installation.
21. Install the auxiliary under-hood fuse/relay box See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal
and Replacement/Automatic Transmission Installation.
22. Install the battery heat shield See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Installation.
