ZDX V6-3.7L (2010)
Power Window Switch: Service and Repair
Power Window Master Switch Replacement
Power Window Master Switch Replacement
1. Remove the driver's power window switch panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Front Door Panel Removal/Installation.
2. Remove the four screws (A), then remove the power window master switch (B) from the power window switch panel assembly (C).
3. Remove the four screws and the power window master switch.
4. Install the switch in the reverse order of removal.
5. After replacement, reset the power window control unit See: Relays and Modules/Relays and Modules - Windows and Glass/Power Window
Control Module/Testing and Inspection.