ZDX V6-3.7L (2010)
Steering Control Module: Service and Repair
ECPS Control Unit Removal/Installation
1. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
2. Remove the driver's front door sill trim See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair.
3. Remove the driver's kick panel See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair.
4. Disconnect the connector (A) from the ECPS control unit (B), then remove the control unit.
5. Install the ECPS control unit in the reverse order of removal.
