ZDX V6-3.7L (2010)
Steering Column Cover: Service and Repair
Steering Column Cover Removal/Installation
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the dashboard or the related parts.
-
Do not pry the column cover surface with any tools.
1. Turn the steering wheel to access the mounting screws, then remove the screws from front side of the column cover (A).
2. Detach the clips and release the hooks fastening the instrument fascia from the upper column cover See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Fascia Removal/Installation.
3. Insert a flat-tip of a small screwdriver or similar tool into the holes (A) in the lower column cover (B). Gently push to release the hooks (C), and
pull up the upper column cover (D) to remove it.