ZDX V6-3.7L (2010)
Tilt Wheel Motor: Testing and Inspection
Power Tilt/Telescopic Steering Motor Test
1. Remove the steering column covers See: Steering Column Cover/Service and Repair.
2. Disconnect the 6P connector and 8P connector from the power tilt/telescopic steering motors.
3. Check each motor by connecting power and ground according to the table. When the motor stops running, disconnect battery power immediately.
4. If the motor does not run or fails to run smoothly; replace the steering column assembly See: Service and Repair/Steering Column
Removal/Installation.