ZDX V6-3.7L (2010)
Rear Knuckle: Service and Repair
Rear Knuckle/Hub Bearing Unit Replacement
Exploded View
Special Tools Required
-
Ball Joint Thread Protector, 12 mm 07AAF-SDAA100
-
Ball Joint Remover, 28 mm 07MAC-SL0A202
NOTE: Refer to the Exploded View as needed during the following procedure.
Hub Bearing Unit Replacement
1. Raise and support the vehicle See: Wheels and Tires/Vehicle Lifting/Service and Repair.
2. Remove the wheel nuts (A) and rear wheel.
