ZDX V6-3.7L (2010)
10. Install the trailing arm in the reverse order of removal, and note these items:
-
First install all of the components, and lightly tighten the bolts and the nuts, then raise the suspension to load it with the vehicle's weight before
fully tightening to the specified torque.
-
Do the parking brake adjustment See: Brakes and Traction Control/Parking Brake System/Adjustments.
-
Fill the master cylinder reservoir to the MAX (upper) level line, and bleed the brake system. Check for a leak at the brake hose/line joint, and
retighten it if necessary See: Brakes and Traction Control/Brake Bleeding/Service and Repair.
-
Before installing the wheel, clean the mating surfaces on the brake disc/drum and the inside of the wheel.
11. Check the wheel alignment, and adjust it if necessary See: Alignment/Service and Repair.
