ZDX V6-3.7L (2010)
7. Disconnect the shift solenoid valve C connector (A), and remove shift solenoid valve C (B) with the O-rings (C).
8. Measure the resistance of the shift solenoid valve between connector terminals No. 1 and No. 2.
-
If the resistance is out of the standard, go to step 13 and replace the shift solenoid valve.
-
If the resistance is within the standard, go to step 9 and check the solenoid valve for a clicking sound and operation.
9. Connect a tube (A) to shift solenoid valve C (B).
