ZDX V6-3.7L (2010)
11. Install the ATF filler bolt (B) and a new sealing washer (C).
12. Remove the ATF dipstick (A).
13. Make sure the fluid level is between the upper mark (B) and the lower mark (C) on the dipstick, then insert the dipstick back into the dipstick
guide tube.
14. Install the engine undercover.
15. Install the intake air duct See: Service and Repair/Removal and Replacement/Automatic Transmission Installation.
16. Install the air cleaner See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair.
17. If the maintenance minder required to replace the ATF, reset the maintenance minder See: Instrument Panel, Gauges and Warning
Indicators/Maintenance Required Lamp/Indicator/Description and Operation, and this procedure is complete. If the maintenance minder did not
require you to replace the ATF, go to step 18.
