ZDX V6-3.7L (2010)
Shift Interlock Switch: Service and Repair
Park Pin Switch Replacement
NOTE: The park pin switch, the A/T gear position indicator, and the shift lock solenoid harness are not available separately. Replace the park pin switch,
the A/T gear position indicator, and the shift lock solenoid harness as a set.
1. Remove the shift lever assembly See: Shifter A/T/Service and Repair/Removal and Replacement/A/T Shift Lever Removal.
2. Remove the shift lock solenoid, and disconnect the shift lock solenoid connector See: Shift Interlock Solenoid/Service and Repair.
3. Remove the harness wire ties (A).
4. Remove the park pin switch (B), and replace the park pin switch/A/T gear position indicator/shift lock solenoid harness assembly (C).
5. Connect the shift lock solenoid connector, and install the shift lock solenoid in the shift lever See: Shift Interlock Solenoid/Service and Repair.
6. Route the harnesses as shown. Take the slack out of the harnesses, and secure the harnesses with the harness wire ties (A).