ZDX V6-3.7L (2010)
Differential Temperature Sensor/Switch: Service and Repair
Rear Differential Fluid Temperature Sensor Replacement
1. Drain the rear differential fluid, and reinstall the drain plug with a new sealing washer See: Service and Repair/Removal and Replacement/Rear
Differential Fluid Inspection and Replacement.
2. Remove the rear differential fluid temperature sensor cover (A) and rear differential harness bracket D, then disconnect the rear differential fluid
temperature sensor 2P connector (B).
3. Remove the rear differential fluid temperature sensor (C).
4. Install the rear differential fluid temperature sensor with a new O-ring (E) in the reverse order of removal.
5. Refill the rear differential with the recommended fluid See: Service and Repair/Removal and Replacement/Rear Differential Fluid Inspection and
Replacement.