ZDX V6-3.7L (2010)
17. Install the shift cable bracket (A).
18. Apply molybdenum grease to the hole in the bushing (A) in the shift cable end (B).
19. Attach the shift cable end to the control lever (C), then insert the control pin (D) into the control lever hole through the shift cable end, and secure
the control pin with the spring clip (E).
20. Install the battery base See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission
Installation.
21. Install the auxiliary under-hood fuse/relay box See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic
Transmission Installation.
22. Install the battery heat shield See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission
Installation.
