ZDX V6-3.7L (2010)
Windshield Washer Reservoir: Service and Repair
Washer Reservoir Replacement
1. Open the hood and remove the right front inner fender See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front
Inner Fender Replacement.
2. Disconnect the 2P connectors (A) from the windshield washer motor (B), washer fluid level switch (C), and the headlight washer motor (D) (if
equipped).
3. Disconnect the washer tube(s), then if necessary, remove the washer motor, the washer fluid level switch (C), and the headlight washer motor (D)
(if equipped).
NOTE: Fluid may flow out of the opening.
4. Remove the right headlight See: Lighting and Horns/Headlamp/Service and Repair/Headlight Replacement.
5. Remove the three bolts (A) from the washer reservoir (B).