ZDX V6-3.7L (2010)
Wiper Motor: Service and Repair
Wiper Motor Replacement
Wiper Motor Removal
1. Remove the wiper arms See: Wiper Arm/Service and Repair.
2. Remove the cowl cover See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair.
3. Disconnect the 5P connector (A) from the windshield wiper motor.
4. Remove the four bolts (B) and the wiper linkage assembly (C).
5. Pry the linkage from the link using a pry bar (A).
NOTE:
Be careful not to damage the rubber (B) and the linkage (C) with pry bar.
6. Separate the linkage (A) from the link (B).