audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Infrared Key Transmitter - Verification of Output Signal|Page 6405 > < Component Location By Track Number|Page 6399
Page 1
background image

Keyless Entry Transmitter: Technical Service Bulletins
Infrared Key Transmitter - Verification of Output Signal

Group:

57

Number:

91-08

Date:

12/11/91

Subject:

Infrared Key Transmitter Verification Test Of Output Signal

Model(s):

100 CS

M.Y. 1992

This Bulletin supersedes Bulletin No. 91-04, Group 57, dated 10/08/91.

All 1992 100 CS models are equipped with infrared remote control locking system.

The infrared remote transmitter is located inside the ignition key.

Radio Shack(R) infrared sensor, Catalog No. 276-0099 (locally available) can be used to check infrared output signal from the transmitter key to the
receiver.

Hold sensing patch close to the infrared LED located on the key.

Press and hold key button down once.

A quick flash of light will appear on the sensor patch each time the key button is pressed.

Note:

Hold patch as close to bulb as possible during this test. If light does not appear check batteries in the key.

Infrared Key Transmitter - Verification of Output Signal|Page 6405 > < Component Location By Track Number|Page 6399