200 Quattro Wagon L5-2226cc 2.22L SOHC Turbo (MC) (1989)
Fig 7. Seat Cover Installation
-
Install seat cover to seat cushion at 14 slit points with upholstery clips as shown in Fig 7.
-
Glue side element sections to seat cushion with 3M Trim Adhesive or equivalent
-
Keep wrinkle free
-
Complete reinstalling seat cover to seat cushion
-
Install seat components in reverse order
-
Place seat at rear of seat tracks
-
Tilt seat back and reconnect electrical connectors
-
Reinstall seat to track
-
Reconnect battery ground strap
-
Check seat for proper function
Note
Backrest element replacement procedure is identical.