200 Quattro Wagon L5-2226cc 2.22L SOHC Turbo (MC) (1989)
If an on-the-car brake lathe is not available, replace both front brake rotors.
See page 4 for instructions regarding installation of new rotors.
CAUTION
Do not true the front brake rotors off the car during this procedure.
Note
The minimum thickness specification for brake rotors is located on the outside of the part (arrow)
^
if necessary, install new brake rotors, Part No. 447 615 301 B
CAUTION
Part numbers are for reference only. Always check with your Parts Department for latest Information.
^
index rotor to hub using center punch