audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Brake Fluid - Chaning or Topping Off|Page 4185 > < Front Brake Caliper, Servicing|Page 4180
Page 1
background image

Brake Fluid: Technical Service Bulletins
Brake Fluid - Chaning or Topping Off

Group:

47

Number:

91-01

Date:

1/31/91

Subject:

Brake Fluid Change/Topping Off

Model(s): 

All Audi Vehicles

Important!

^

Brake fluid is extremely sensitive to contamination.

^

When topping off (only if the level is below minimum) or when changing brake fluid use new brake fluid type DOT 4 (according to US Standard
FMVSS 166).

^

Only use brake fluid from the original container. Brake fluid must be free from contaminants, such as mineral oil, power steering fluid, moisture
etc., since even the smallest amount of contaminants (more than 0.1% of the total quantity) can cause swelling of rubber components, master
cylinder boots and damage the system.

^

Brake system damage caused by using incorrect or contaminated fluid is not covered by warranty.

Brake Fluid - Chaning or Topping Off|Page 4185 > < Front Brake Caliper, Servicing|Page 4180