audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Other Service Bulletins for Knock Sensor: > < All Technical Service Bulletins:|289003|Page 3683
Page 1
background image

Grounding Point: All Technical Service Bulletins
Engine - Long Cranking, Intermittent Stumble, Misfire

Group:

25

Number:

91-13

Date:

10/31/91

Subject:

Long Cranking Time, Intermittent Stumble and Misfiring

Model(s):

200, 5000T - With 2.22L, Engine Code MC

All M.Y.

This Technical Bulletin supersedes Technical Bulletin, Group 25, # 91-01 dated March 31, 1991

Condition:

Intermittent long cranking time either hot or cold.

Possible Cause:

High resistance on ground stud caused by sealing compound (Loctite).

Service:

Remove the ground stud on the intake manifold. Inspect the stud and the threaded bore for signs of Loctite. Clean the internal as well as the
external threads. Reinstall the stud and ground wire.

Complete a quality check with a cold engine and again with the engine at operating temperature before returning vehicle to customer.

All Other Service Bulletins for Knock Sensor: > < All Technical Service Bulletins:|289003|Page 3683