200 Quattro Wagon L5-2226cc 2.22L SOHC Turbo (MC) (1989)
/Page-1803001.png)
Starter Motor: Service and Repair
Starter, removing and installing
Disconnect battery ground strap
1 - terminal 30 (wiring from battery to starter and starter to alternator)
2 - terminal 50 (to ignition/starter switch)
- detach wiring
- remove starter mounting screws on engine/transmission
Starter installation
- reverse of removal procedure
- torque mounting bolts to 25 Nm (18 ft lb)
Caution:
It is important that all wiring be connected with proper polarity, otherwise serious engine damage could occur.
