200 Quattro Wagon L5-2226cc 2.22L SOHC Turbo (MC) (1989)
Wheel Bearing: Service and Repair
Wheel Bearing Housing, Servicing
Rear wheel bearing housing, removing/installing
CAUTION: Remove and install axle bolt only with wheels on the ground. Do not move vehicle without driveshaft outer cv joint installed or
wheel bearing will be damaged.
Removing
-
remove wheel trim
-
loosen wheel lug bolts
-
remove axle bolt
-
remove wheel bolts and wheel
-
remove bolt holding caliper (arrow)
-
remove caliper and secure to body with wire
-
remove brake disc
-
remove nut and bolt (arrow) securing transverse link to wheel bearing housing
-
remove bolt from lower suspension strut mounting
-
remove bolt securing wheel bearing housing to trapezoidal arm (lower arrow)
-
remove wheel speed sensor