200 Quattro Wagon L5-2226cc 2.22L SOHC Turbo (MC) (1989)
Clutch Master Cylinder: Service and Repair
Note: Do not operate the clutch pedal after the slave cylinder is removed.
Fill the brake fluid reservoir to the "max" marking with brake fluid before bleeding the hydraulic clutch system with a brake bleeding device.
1 - Brake fluid reservoir
2 - Return hose
3 - Grommet
4 - Angle connector
5 - Sealing plug
moisten with brake fluid to install
6 - Master cylinder
7 - 20 Nm (15 ft lb)
8 - Lock nut
9 - Clevis
10 - Bolt
11 - Circlip
12 - Pressure line
13 - Grommet
14 - Washer
smaller inner diameter than washer 17
15 - Bracket
16 - Bushing
17 - Washer
larger inner diameter than washer 14
18 - Pressure hose
19 - Slave cylinder
installing (after 12/87) refer to See: Clutch Slave Cylinder/Service and Repair
do not operate clutch pedal after slave cylinder is removed
20 - Breather valve
only open to bleed