4000CS Quattro L5-2144cc 2.14L SOHC (JT) (1986)
Some front/rear brake pads are supplied with an anti-vibration backing (non-sticky). Do Not remove this type of backing.
-
Clean brake pads using a suitable cleaning method.
CAUTION!
Plastilube Moly3(R) high temperature grease must not come into contact with the braking surface of the brake pad or the brake rotor.
Brake calipers, cleaning
-
Clean brake pad carrier contact points (arrows) very thoroughly (filing until clean if necessary)
-
apply a thin coat of Plastilube Moly3(R) high temperature grease to these points.
-
Clean caliper piston to brake pad contact surfaces
-
Reinstall brake rotors to indexed position.