4000CS Quattro L5-2144cc 2.14L SOHC (JT) (1986)
Fig. 3 Ignition switch retaining screw (arrow).
10.
Remove screw, Fig. 3, and ignition switch from housing.
Fig. 2 Ignition switch & steering lock installation.
11.
Push new steering lock and ignition switch assembly ``D'', Fig. 2, onto steering column tube to stop and install retaining bolt.
12.
Push support ring ``E'', Fig. 2, onto steering shaft ``G'', and fit shaft into tube ``F''.
13.
Push contact ring ``C'' onto steering shaft to stop and install spring ``B'', Fig. 2, and lock washer ``A'', fully compressing spring.
14.
Reverse procedure to install combination switch, steering wheel and covers.