4000,S L4-1781cc 1.8L SOHC (MG) (1985)
Door Trim Panel, Removing
Door trim panel, removing
Work sequence
-
unscrew and remove door locking knob
-
remove inner door handle escutcheon
-
take off two screws holding armrest, pull away from panel
-
push out mirror control from back and disconnect electrical plug
-
unscrew and carefully pry off trim cover by side mirror
-
remove hold down screw at upper right corner of door trim panel
-
pull panel loose from clips in door frame
-
starting with clip nearest locking knob, push window slot seal off door flange
^
Distance between clips (a) = 195 mm
Door Trim Panel, Removing
CAUTION
Place a cloth under screwdriver when prying to prevent damage to trim molding
-
insert screwdriver in window slot seal groove (arrow)
-
carefully push trim panel (with window slot seal attached) away from door flange and pull upwards