5000CD Turbo (Canada) L5-2144cc 2.14L SOHC Turbo (KH) (1984)
Throttle Full Close Switch: Adjustments
Turbo
NOTE: Throttle body must be removed to perform checking/ adjusting procedures
IDLE SWITCH
-
attach pointer for protractor 3084 to throttle body
-
mount protractor 3084 to throttle body shaft
-
remove throttle lever mounting nut if necessary
-
connect multimeter US 1119 to both terminals of idle switch
-
zero protractor
-
open throttle to approx. 20°, then slowly close throttle
-
specification: 0 ohms at 2 to 4° before closed throttle position
IF NO:
-
adjust idle switch at mounting screws
If still NOT OK:
-
replace idle switch
FULL THROTTLE SWITCH